In addition, error code 0X80300024 has also followed the Windows Operating System through all of its iterations, so both Windows 7 and Windows 10 users are susceptible to running into it while trying to install Windows. Thankfully, error code 0X80300024 is not the end of the world – the following are some of the most effective solutions that you can use to try and get rid of error code 0X80300024 and successfully install Windows:
Solution 1: Remove any unnecessary hard drives
If you have more than one hard disk drive connected to your computer and are trying to install Windows on one of them, the other hard drive(s) might be interfering with the installation, resulting in the installation failing and error code 0X80300024 being displayed. To make sure that this is not the case, remove any hard drives that you do not want to install Windows on from your computer and retry the installation to determine whether or not the issue persists.
Solution 2: Try plugging the installation media into a different USB port
If you are trying to install Windows from a USB with the appropriate installation media on it, as most people do, the cause of this problem might simply be the USB port the installation media is plugged into. Try installing Windows with the USB with the installation media on it inserted into a different USB port – switch from a USB 2.0 port to a USB 3.0 port or vice versa, and see whether or not that allows Windows to be successfully installed.
Solution 3: Make sure the target drive is at the top of the computer’s boot order
You might be seeing error code 0X80300024 because the hard drive you are trying to install Windows on is not at the top of your computer’s boot order. On startup, every computer has an order of sources it tries to boot the Operating System from, and this order is configured through the average computer’s BIOS. To remedy this problem, all you need to do is make sure the target hard drive is at the top of your computer’s boot order: Once done, restart the Windows installation and see whether or not it goes through successfully.
Solution 4: Format the installation location
If the partition of the hard drive you are trying to install Windows in has been in use before and is not a freshly created partition, some of the data on it might be interfering with the Windows installation. This is why it is always recommended to format the installation location before installing Windows on a computer. If the data in the installation location is what is causing this problem in your case, completely formatting the installation location should resolve the problem.
Solution 5: Replace your hard drive
If absolutely none of the solutions listed and described above have worked for you, you might just have a dying or already dead hard drive. A dying hard drive can certainly prevent an Operating System such as Windows from being installed, so if all else fails, replace your hard drive with a new one and that is bound to get rid of error code 0X80300024 for you.
Solution 6: Using DiskPart
In some cases, the error might be triggered if there is corruption in the partition tables of the drive. Therefore, in this step, we will be using DisakPart to fix this issue. For that:
How to Fix Installing Windows Product Key Error 0x800F0805 on Windows 10?Fix: Error 0xc0000409 when Upgrading or Installing WindowsFix ‘Error Code: 0x8030002F’ When Installing or Upgrading Windows?How to Fix “Error Code: 0x80070570” When Installing Windows 11?
